Setting The Alarm Time - Silvercrest SFPW 360 B1 Operating Instructions Manual

Setting the alarm time

The appliance allows you to set two different alarms.
The set alarm times always relate to the time shown
on the display (local time or time zone).
♦ In basic mode, press the SET button
access alarm mode. The current alarm time is
shown on the display and the symbol for the first
alarm (AL1).
♦ Press the SET button
hours flash on the alarm time display.
♦ Press the – /WEEK LANG button
+/ZONE 12/24 button
♦ Press the SET button
The minutes flash on the alarm time display.
♦ Press the – /WEEK LANG button
+/ZONE 12/24 button
♦ Press the SET button
to exit. Alarm time 1 is now set.
NOTICE
► The process for setting the second alarm time is
similar to that of setting the first.
♦ In basic mode, press the SET button
to access alarm mode. The current alarm time
is shown on the display and the symbol for the
second alarm (AL2).
♦ Now, follow the steps described above to set the
second alarm time.
│ GB │ IE
■ 44
for about 3 seconds. The
to set the desired value.
to confirm your entry.
to set the desired value.
to confirm your entry and
once to
or the
or the
twice
SFPW 360 B1