Setting The Alarm; Activating / Deactivating The Alarm; Switching Off The Alarm; Activating The Slumber Function - Silvercrest Z31311 Operation And Safety Notes

Note: The AM symbol
3
hours in 12 hour mode. The PM symbol
the afternoon hours in 12 hour mode.
Note: You may select display of the weekdays
different languages. The default setting is German.
The following languages are available:
ENG = English
GER = German
FRE = French
ITA = Italian
DUT = Dutch
SPA = Spanish
DAN = Danish
POR = Portuguese

Setting the alarm

Alarm 1 :
7
1. Briefly press the ALARM key
set for the alarm will be displayed in the LC display.
2. Press the ALARM key
seconds. The hour display blinks.
3. Press the + / 12 / 24 key
key 24 to set the desired value. Press the ALARM
key 22 to confirm your entry.
4. The minute display blinks. Repeat step 3 to set the
value for the minutes.
Alarm 2 :
8
1. If the projection radio-controlled alarm clock is in
time display mode, briefly press the ALARM key
twice.
22
2. Press the ALARM key
2 seconds. The hour display blinks.
14 GB
78346_silv_Projektions-Funkwecker_Content_SE_SI_01.indd 14-15
stands for the morning
2 stands for
in
15
once. The time
22
22 and hold for about 2
23 or the - / C / F /RCC
22 and hold for about
3. Press the + / 12 / 24 key
key 24 to set the desired value. Press the ALARM
key 22 to confirm your entry.
4. The minute display blinks. Repeat step 3 to set the
value for the minutes.
Activating / deactivating the
alarm
Briefly press the ALARM key
reach Alarm 1 or Alarm 2 mode.
Press the + / 12 / 24 key
symbol 7 or the Alarm 2 symbol
the LC display. The alarm is activated.
Press the + / 12 / 24 key
symbol 7 or the Alarm 2 symbol
display goes out. The alarm is deactivated.

Switching off the alarm

During the alarm, press any key except the
SNOOZE / LIGHT key 17
It is not necessary to reactivate the alarm. It
automatically switches itself on in the set weekly
rhythm.
Note: The alarm switches itself off after one
minute.

Activating the slumber function

During the alarm, press the SNOOZE / LIGHT key
17 to stop the alarm. The alarm automatically
switches back on after 5 minutes.
23 or the - / C / F /RCC
22 once or twice to
23 until the Alarm 1
8 appears on
23 until the Alarm 1
8 on the LC
to stop the alarm.
GB 15
8/5/12 2:21 PM