Handling And Operation; Setting The Date And Time Manually - Silvercrest SFPW 360 B1 Operating Instructions Manual

The time is shown in 24-hour format by default. If
you select the 12-hour format, the abbreviation PM
(Latin: "post meridiem" = afternoon) is shown in front
of the time between 12 noon and 11.59 at night. The
abbreviation AM (Latin: "ante meridiem" = morning)
is shown in front of the time between 12 midnight and
11.59 in the morning. During the summer period,
DST (daylight saving time) is displayed. This display
is only shown if the DCF signal is being received.
The room temperature is displayed to one decimal
place under the time. The preset temperature unit is
degrees Celsius ( ) and can be changed to degrees
Fahrenheit ( ).

Handling and operation

Setting the date and time manually

NOTICE
If no button is pressed for around 20 seconds
during manual setting of the time, the appliance
exits setting mode.
Any settings already made will be saved.
♦ In basic mode, press the SET button
seconds. The year flashes on the display.
♦ Press the – /WEEK LANG button
+/ZONE 12/24 button
♦ Press the SET button
The month display flashes on the display.
♦ Press the – /WEEK LANG button
+/ZONE 12/24 button
value.
│ GB │ IE
■ 40
to set the desired value.
to confirm your entry.
to set the desired
for about 3
or the
or the
SFPW 360 B1