the keys are out of operation. Only the SNOOZE /
LIGHT key
alarm goes off, the search for a signal will be ended.
As soon as the signal is found, the radio symbol
goes out.
Note: No settings are possible during reception of
the DCF radio signal. Therefore, press the - / C / F /
RCC key
of the DCF radio signal.
1. Press the - / C / F / RCC key
2. Press the - / C / F / RCC key
3. Hold the SET key
4. Press the + / 12 / 24 key
5. Press the SET key
6. Repeat steps 3 to 5 to set the values for minute,
63698_silv_Projektions-Funkwecker_Content_LB5.indd 63
can be operated. In the event the
17
Operation
Setting the 12 / 24 hour display
for about 3 seconds to interrupt reception
24
2 seconds until the radio symbol
about 2 seconds to manually deactivate reception
of the DCF radio signal.
21
2 seconds. The time display
RCC key
to specify the desired time setting
24
(12 / 24 hours).
Tip: Hold the + / 12 / 24-key
RCC-key
pressed down. This will accelerate
24
the setting of the values. This fast setting can also
be used for the additional setting processes. If
you do not press any key within 20 seconds, the
LC display automatically returns to the standard
display.
21
hour, date / month or month / date, day, year
and language.
14
for about
24
blinks.
4
once again for
24
pressed down for about
blinks.
1
or the - / C / F /
23
or the - / C / F /
23
to confirm your entry.
GB/MT
4
–
12
63
27.07.11 13:11