Operational - Fieldmann FDPO 200711-E User Manual

6. OPERATIONAL

ON/OFF switch (B3)
To switch on:
Press the ON/OFF switch (1)
To switch off:
Release the ON/OFF switch (1)
Locking button (B3)
You can lock the ON/OFF switch (1) using the locking button (2) when the equipment is in operation. To lock it,
press the ON/OFF switch. To switch off the equipment briefl y hold down the ON/OFF switch.
Use as a jigsaw (B5)
Place the reciprocating saw on the material to be cut as shown in Fig. 5. Switch on the reciprocating saw and
push it along against the material to be cut. Adapt your cutting speed to the material.
LED lamp
The LED light (9) makes it possible to illuminate working in unfavorable lighting conditions. The LED light (9)
lights up automatically as soon as you put the plug in the socket.
Replacing the power cable
If the power cable for this equipment is damaged, it must be replaced by the manufacturer or its aftersales
service or similarly trained personnel to avoid danger.
ELECTRICAL RECIPROCATING SAW
13 EN
Operational
USER'S MANUAL