Fault Record Tool Interface - ABB Relion 611 Series Engineering Manual

1MRS241255 B
5.3.2
611 series
Engineering Manual
The Fault Record tool runs in the same process as PCM600 but in a separate
window. Multiple instances of the tool can be run at the same time. Any open tool
instances are closed without confirmation when PCM600 is closed.
The Fault Record tool is a connectivity package tool. The main functionality is divided
into three parts: reading the fault record parameters from the protection relay,
displaying their names, values and units on the user interface and saving them to a text
file. It is also possible to clear all the fault records from both the tool and the protection
relay and copy the fault records either individually or all at once to a word processor.

Fault Record tool interface

GUID-23B7301C-57E0-4D5D-A38E-135E75B5A8AB V1 EN
Figure 46: Fault record tool
Table 5: Available actions on the user interface
Action Description
Read Clicking the Read button reads all available fault records from the protection relay
into the tool. User has the option to read 1 fault record, 20 fault records or all fault
records. The Read button opens up a progress bar to indicate an ongoing read
operation.
Click the Cancel button on the Read progress bar to cancel the read operation. On
operation completion, the available fault records are shown in the record grid.
Click the + icon to expand and view record details.
Save Click Save to save the fault records on the local machine as .txt file.
Clear Record can be cleared from either the Fault record tool or the protection relay or
both. Before deleting the records, a confirmation dialog box is shown.
Table continues on next page
Protection and control engineering
Section 5
63