Installation; Mounting; Display Unit Gs-1002 - Furuno GS-100 Operator's Manual

8.

INSTALLATION

8.1

Mounting

Do not apply paint, anti-corrosive sealant or contact
spray to coating or plastic parts of the equipment.
Those items contain organic solvents that can damage
coating and plastic parts, especially plastic connectors.
8.1.1

Display unit GS-1002

The display unit can be installed one of three ways, tabletop or flush mount (two
types). Refer to the outline drawings at the end of this manual.
• Locate the unit away from the exhaust pipes and vents.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• Keep the display unit away from electromagnetic field generating equipment such
as motor, generator.
• Allow sufficient maintenance space and slack in cables for maintenance and repair.
Tabletop mounting
NOTICE
8-1