Furuno GS-100 Operator's Manual page 138

APPENDIX 10 DISPLAY FOR DS-600
Presetting
The following settings must be set by a serviceman.
• When using the DS-600 as the sub display for the GS-100, set [Operation] to [Sub] in the [Ser-
vice] menu for DS-60 (see paragraph 8.5.2).
• When using the DS-600 as the sub display for the GS-100 and DS-60, set [Operation] to [Sat-
ellite] in the [Service] menu for DS-60 (see paragraph 8.5.2).
• Set the ship size and antenna position for GS-100 (see page 8-21) to the same settings as the
DS-60.
For details, see the Installation manual for DS-60.
Switching the data
To switch the data between GS-100 and DS-60, long-press the DISP key of the display unit DS-
600. "Ground" or "Water" is displayed at the right top of the display for DS-60, "SAT" for GS-100.
Data for DS-60
AP-30
Example: Navigation data display
Long-press
the DISP key.
Data for GS-100
Data from GS-100 are displayed.
Others are from DS-60.