Furuno GS-100 Operator's Manual page 23

3. Select [1 Window1].
4. Select [1 Roll/Pitch], [2 SDME] or 3 [Blank].
5. Select the options for windows 2 to 5 as well.
Atm: Atmospheric pressure
Temp: Air temperature
Note: The options [SDME], [Current], [Wind] and [Depth] require appropriate ex-
ternal sensors.
6. Press the MENU ESC key to close the main menu.
HDOP: 2D
PDOP: 3D
Status
indication
Heading
Roll
(
: Starboard
: Port
Pitch
(
: Up
: Down
Ship's position
Time and date
[Roll/Pitch], [Position], [Time&Date], [Heave] or [Trip Time] selected
Window1
Window3
Calculation state
(Start up, Normal, DR (Dead-Reckoning),
Stopped (HDG stopped),
SYS FAULT (System fault))
GN 3D
-
Displays external input data
for doppler SOG/COG.
Window2
Window4 Window5
See page
AP-8.
2. DISPLAYS
Satellite
number
Spinner
common
rotates when
to ANT1
the equipment
and ANT2
is functioning
normally.
Rate of turn
(
: Starboard
: Port
GNSS speed
over ground
and course
over ground
Heave
Trip time
Total distance
Trip distance
2-3