Furuno GS-100 Operator's Manual page 110

1
Backup
Backup User Setting (Yes, No )
Load User Setting (Yes, No )
SW/Database Update*
Chk the Available Software
Chk the New Data Table
Exchange*
Display Unit
Antenna Unit
Serial No. (Open the entry window.)
Destination Language (English ,
Sensor Status* (Open the sensor status window.)
5 I/O
Output Data1 to 4
Format* (IEC61162-1 Ed.4 , IEC61162-1 Ed.3, NMEA V2.0, NMEA V1.5,
IEC61162-1 Ed.5)
BPS* (4800 bps, 38400 bps)**
Sentence (HDT: Off , HRM: Off , ROT: Off , THS: 0.2s ***, VBW: 1s , VLW: 1s ,
VTG: 1s , ZDA: 1s , GPatt: Off , GPhve: Off, GPimu: Off ) ***: 0.020s for Output Data4.
Ethernet
Sentence (HDT: 0.1s , HRM: 0.1s , ROT: 0.1s , THS: 0.020s , VBW: 1s , VLW: 1s ,
VTG: 1s , ZDA: 1s , GPatt: 0.020s , GPhve: 0.020s, GPimu: Off )
SFI* (Open the entry window.)
IP ADR/Port* (Open the entry window.)
Data Source Select
HDG (Data1, Data2, Data4, Ethernet, CAN , User Priority)
Ext. STW/COG/SOG (Data1 , Data2, Data4, Ethernet, User Priority)
Ext. CUR (Data1 , Data2, Data4, Ethernet, User Priority)
Ext. DEPTH (Data1 , Data2, Data4, Ethernet, User Priority)
Ext. Wind (Data1 , Data2, Data4, Ethernet, User Priority)
Line Monitor
Data1 (Open the line monitor for serial data1.)
Data2 (Open the line monitor for serial data2.)
Data3 (Open the line monitor for serial datat3.)
Data4 (Open the line monitor for serial datat4.)
Ethernet (Open the line monitor for Ethernet.)
CAN (Open the line monitor for CAN.)
GS-1001* (No , USB, UDP)
1
LAN Error Counter (Open the LAN error data list.)
AP-2
Display Unit: Application
Display Unit: Boot
Antenna Unit: Application
Antenna Unit: GNSS
Antenna Unit: OS
Datum
WMM
LCD (Yes, No )
Main (Yes, No )
Main (Yes, No )
OMG (Open the setting window.)
ACC (Open the setting window.)
ATM (Open the setting window.)
TEMP (Open the setting window.)
**: Default (Output Data1 to 3: 4800 bps, Output Data4: 38400 bps)
*: For serviceman.
)