Furuno GS-100 Operator's Manual page 100

8. INSTALLATION
SOG offset
1. Press the MENU ESC key to open the main menu.
2. Select [6 Sensor Setting] then [1 Offset].
3. Select [6 SOG Offset].
4. Enter the offset value with the numeric keys as follows:
5. Move the cursor to [Enter] then press the ENT key.
6. Press the MENU ESC key to close the main menu.
Atmospheric pressure or air temperature offset
1. Press the MENU ESC key to open the main menu.
2. Select [6 Sensor Setting] then [1 Offset].
3. Select [7 ATM Offset] or [8 TEMP Offset].
4. Enter the offset value with the numeric keys as follows:
To switch between + and -, press the cursorpad (◄) to move the cursor
here then press any numeric key.
5. Move the cursor to [Enter] then press the ENT key.
6. Press the MENU ESC key to close the main menu.
8-22
To switch between + and -, press the cursorpad (◄) to move the cursor
here then press any numeric key.
Atmospheric pressure
1) For example, to enter "+10.0", press the
cursorpad (►) to move the cursor here.
2) Press the 1, 0, 0 keys. When inputting
positive number, "+" appears.
1) For example, to enter "+10.0%", press the
cursorpad (►) to move the cursor here.
2) Press the 1, 0, 0 keys. When inputting
positive number, "+" appears.
Air temperature