7. MAINTENANCE, TROUBLESHOOTING
3. Select [4 Maintenance] then
[3 Backup].
4. Select [1 Backup User Setting] or [2 Load User Setting].
[Backup User Setting]: Saves the cur-
rent settings to USB.
[Load User Setting]: Loads the saved
settings from USB. This menu item re-
quires the password.
The confirmation message appears.
5. Select [1 Yes]. The message
"Now Processing.... "appears.
7.8
Replacement Parts Settings
Note: This function is for a serviceman.
7.8.1
How to reset the operating time for replacement parts
Before replacing an LCD or main panels for display or sensor unit, reset the usage
hours indication for the replaced part.
1. Press the MENU ESC key to open the main menu.
2. Select [4 Maintenance] then
[5 Exchange].
3. Select [1 Display Unit] or [2 Antenna Unit].
4. For [Display Unit], select [1 LCD] or
[2 Main]. For [Antenna Unit], select
[1 Main]. The confirmation mes-
sage appears.
7-8