Siemens SINUMERIK 840D sl Commissioning Manual page 40

Commissioning
5.4 Robot configurator
In addition to the "RobotInstallation" folder, a CMC package (*.usz") is automatically saved. All
of the files in the created folder are needed for this package.
Note
Select the root directory of your USB flash drive that you want to use to install the robots as the
destination path. In this way, you ensure that all of the files are saved at the correct location.
NOTICE
CMC package
The CMC package ("*.usz") must be located in the root directory of the USB flash drive. Never
use a boot stick for the installation.
Format the USB flash drive with the "FAT32" file system.
Do not make any changes to the files, the folder structure, or the storage of the files!
All of the files are correctly saved and do not have to be further processed.
Exception: Copy the compile cycle AXCO into the folder provided.
40
SINUMERIK Run MyRobot /Direct Control
Commissioning Manual, 12/2018, A5E45238414B AB