Racelogic VBOX Mini User Manual page 21

08 - VBOX Mini Performance Mode
Performance mode is used to measure the acceleration and braking performance of your vehicle. Press the MODE
button to scroll to the Performance Mode screen. This mode is divided into six screens, each of which displays different
performance data. Navigate between these screens by using the▲▼buttons. Each screen will automatically display the
results as they happen, e.g. if you drive from 0 mph to 60 mph then the 0-60 section will show the time taken.
Below is a list of the available Performance Mode display screens.
This Acceleration Screen displays a live velocity in the
left half and in the right it shows the times of the
following preset test ranges. 0 to 60, 0-100 and 0-100-0.
It also shows the maximum speed.
Acceleration 2 screen shows the 30-50 and 50-70 times.
However these two test ranges are user adjustable
through the setup menu. Peak lateral g (cornering force)
is also shown along with an average velocity value.
https://racelogic.support/01VBOX_Automotive/01VBOX_data_loggers/VBOX_Mini/
21