Changing Modes; Changing The Units Of Measurement; Satellite Reception - Racelogic VBOX Mini User Manual

Changing Modes

Press the MODE button to swap between the display modes.
PERFORMANCE
PREDICTIVE

Changing the Units of Measurement

1. Press the MENU button from any of the Display Modes.
2. Highlight UNITS and press OK.
3. Highlight SPEED and press OK.
4. Highlight KMH or MPH and then press OK to tick that selection.
5. Highlight EXIT and press OK.
To change the Distance units from metres to feet, follow the same procedure but highlight DISTANCE and press OK.

Satellite Reception

All logged data is calculated from the information received from GPS satellites, so relies on being able to get a good lock
Used to show previous
screen, or to navigate
menu.
LAPTIMIING
https://racelogic.support/01VBOX_Automotive/01VBOX_data_loggers/VBOX_Mini/
DRIFT
Resets totals, averages
and peaks if held for 1.5s.
Hold for 5s for global
Reset.
SPEED DISPLAY
INPUT
5