Configuring The Inputs And Outputs - Racelogic VBOX Mini User Manual

Then the screen will display the data output diagnostic screen. Once this has happened the VBOX Mini will log the input
module data. In firmware revision 1.4.76 and above a new display can be accessed by pressing down in this mode.
This screen displays Speed and a selected input module channel. To select an input module channel press the MENU
button then navigate through the list to select display channel. From this screen any one of the MIM channels can be
selected.
NOTE: After each power up, the Input Module Screen on the VBOX Mini must be accessed in order for the VBOX
Mini to recognise the presence of the MICIN01. After this has been done, any of the VBOX Mini screens can be used,
but this must be done or the MIM channels will not be logged.

Configuring the Inputs and Outputs

See the Mini or Micro Input Module user guide for a full explanation of configuring the inputs and outputs of a Mini/Micro
input Module.
https://racelogic.support/01VBOX_Automotive/01VBOX_data_loggers/VBOX_Mini/
15