Table of Contents
Advertisement
2 Installing the 6415
In this chapter
This chapter explains how to install the 6415 stepper motor drive.
Topics covered are:
• Unpacking and inspecting the 6415
• Installing and using the 6415 unit safely
• Selecting other system components
• Mounting the 6415 in your installation
• Connecting input/output cables
2.1 Unpacking and Inspecting
Unpacking
1. Remove the 6415 from the shipping carton. Make sure all
procedure
2. Check the items against the packing list. A label located
Inspection
Inspect the unit for any physical damage that may have been
procedure
sustained during shipment.
If you find damage, either concealed or obvious, contact your
buyer to make a claim with the shipper. Do this within 10 days of
receipt of the unit.
Storing the unit
After inspection, store the drive in a clean, dry, place. The storage
temperature must be between -55 degrees C and 70 degrees C. To
prevent damage during storage, replace the unit in the original
shipping carton.
6415 Installation and Hardware Reference Manual - Rev E
packing materials are removed from the unit.
inside the chassis of the unit identifies the unit by model
number, serial number, and date code.
2 - 1
Advertisement
Table of Contents
