Table of Contents
Advertisement
2 Installing the 5345/5445
Microstep Indexer/Drive
In this Chapter
This Chapter explains how to install the 5345/5445 Microstep
Indexer/Drive. Topics covered are:
_
Unpacking and inspecting the 5345/5445
_
Selecting a motor
_
5345/5445 safety
_
Mounting the 5345/5445 in your installation
_
Connecting input/output cabling
_
Selecting switch functions
2.1 Unpacking and Inspecting the 5345/5445
Unpacking
1. Remove the 5345/5445 from the shipping carton. Make sure
procedure
all packing materials are removed from the unit.
2. Check the items against the packing list. A label located on
the side of the unit identifies the unit by model number,
serial number, and date code.
Inspection
Inspect the unit for any physical damage that may have been
procedure
sustained during shipment.
If you find damage, either concealed or obvious, contact your
buyer to make a claim with the shipper. Do this as soon as
possible after receipt of the unit.
Storing the unit
Store the 5345/5445 in a clean, dry place. The storage
temperature must be between -55 degrees C and 70 degrees C.
To prevent damage during storage, replace the unit in the original
shipping carton.
Rev F
5345/5445 Installation and Hardware Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2 - 1
Advertisement
Table of Contents
