Table of Contents
Advertisement
Safety
In addition to the safety guidelines given in Section 2.2, observe
the following:
• Electronic drives contain electrostatic sensitive devices which
can be damaged when handled improperly. Qualified personnel
must follow ESD protection measures. For example: wear
grounded heel and wrist straps when contacting drive.
• Follow IEC 536-2 and IEC 1140 for installation protection
against electric shock.
• Installation shall be performed in accordance with local electric
codes, local accident prevention rules, and EN 61800-3.
• All covers shall be closed during operation.
• Braided cable shields should be connected to protective earth
ground.
Drive mounting
Mount the drive to a conductive surface of the machine chassis, to
ensure a good high frequency ground. If the chassis is painted or
coated with another nonconductive coating, remove the coating
from the mounting location prior to mounting the drive.
Cable Routing
To avoid the risk of crosstalk, motor and command I/O cables
should be kept away from sensitive signal cables such as telephone
and intercommunication lines.
E - 4
6415 Installation and Hardware Reference Manual - Rev E
Advertisement
Table of Contents
