Table of Contents
Advertisement
Appendix E CE Installation Guide
Introduction
The information contained in this appendix applies to the 6415
ONLY. The 6415 is designed for use within machines that require
compliance with European Safety and EMC Directives. The
standards that the 6415 complies with are described in the
Declaration of Conformity on the following page.
Note: The information contained in this appendix supplements the
material in the MA6415.
Customer
This appendix, supplied with all 6415 series drives, provides
Responsibility
detailed information on installation. This appendix must be closely
followed if EMC compliance is to be maintained. It covers details
such as mechanical mounting, safety earth connections and motor
wiring.
The 6415's input voltage is provided by a user supplied dc power
supply. System harmonics and conducted emissions are dependent
on the system chosen. Therefore, the machine builder is
responsible to properly filter the installation thereby preventing
unwanted conducted line noise.
EN 61800-3 also puts the responsibility of filtering on the machine
builder. For additional information please see the "Assessment of
Compatability" section in EN 61800-3.
6415 Installation and Hardware Reference Manual - Rev E
E - 1
Advertisement
Table of Contents
