Canon 4K6021Z User Manual page 92

Adjusting the Image
2
Use the [▲] / [▼] / [ ] / [ ] buttons to select the point to fine-tune.
3
After selecting the point to fine-tune, press the OK button.
The projector is now in partial distortion correction mode.
• To return to selection of the point for partial distortion correction, press the MENU
button.
• Each time you select [Chart] and press the OK button, display switches between the
chart and the source signal.
• Accessing the partial distortion correction window during test pattern projection will
show the test pattern instead of your supplied signal.
4
Use the [▲] / [▼] / [ ] / [ ] buttons to fine-tune the adjustment point for
partial distortion correction.
5
Select [Return] to return to point selection.
6
Repeat this process to correct other areas.
90