Canon 4K6021Z User Manual page 158

Menu Description
Submenu
Use when there is concern about deterioration of the color and
luminance of the light source due to extended use.
Light source
calibration
Light source calibration can only be used after about 30 minutes of projection.
Trigger out
Operation of a screen or other external device can be triggered by turning the projector on or
off.
Option
Off No output from the trigger terminal.
12 V of voltage output from the trigger terminal during projection. Used
Link with power to trigger operation of a screen or other external device in sync when
the projector is turned on or off.
Air filter counter
Shows a counter to remind you when to replace the air filter.
Also shows a counter reset screen.
• After air filter replacement, reset the air filter counter.
• For details on replacing the air filter, see
Power counter
Indicates the total time that the projector has been connected to a power supply.
This value is not reset even if [Factory defaults] is executed.
Option
OK Execute light source calibration.
Cancel Do not execute light source calibration.
156
Function
Function
Function
P191 – P192.