Canon 4K6021Z User Manual page 149

Menu Description
Submenu
Command monitor
Power supply settings
> [System settings] >
Specify how power is managed at startup, in standby, and when no signal is
supplied.
Standby power setting
Specify network function operating status in standby mode.
Option
All network functions are available when network functions are
Normal
enabled, including the web screen and PJLink.
All functions are disabled except for some wired LAN functions (such
Low-power
as operations over a network).
• [Standby power setting] is set to [Normal] and cannot be changed when scheduling
is enabled (P152).
• [Standby power setting] is set to [Normal] and cannot be changed when wireless
LAN is enabled (P160).
Log, show, hide, or clear user commands.
You can log and view the type, execution time, and IP address
(limited to the last octet at the time of reception) of sent and
received user commands.
Option
Off
On
Display
Clear
[Power supply settings]
147
Function
Function
Disable user command logging.
Enable user command logging.
Show the user command log.
Clear the entire user command log.
Function