Canon 4K6021Z User Manual page 187

Projector Web Screen Menu
Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error
mails and test mails. For the setting procedure, see "Network Setting" (P73).
Item
Error report
To:
Cc:
From:
IPv4 SMTP server IP
address
IPv4 SMTP server port
number
IPv6 SMTP server IP
address
IPv6 SMTP server port
number
Mail resend interval*
Mail resend times
Explanation
Select whether to turn the error mail
sending function on or off, and IPv4 or
IPv6 for the network to use.
Enter the recipient address for error
mails in 1-byte alphanumeric characters
and symbols (1 – 63 characters).
Enter the CC address for error mails in
1-byte alphanumeric characters and
symbols (1 – 63 characters).
Enter the sender address for error mails
in 1-byte alphanumeric characters and
symbols (1 – 63 characters).
Enter the SMTP server IP address
(IPv4) in 1-byte numbers.
Enter the SMTP server port number
(IPv4) in 1-byte numbers (1 – 65535).
Enter the SMTP server IP address
(IPv6) in 1-byte numbers.
Enter the SMTP server port number
(IPv6) in 1-byte numbers (1 – 65535).
Enter the interval for resending mail
when an error occurred (unit: seconds)
within the range of 0 – 59 seconds
using 1-byte numbers.
Enter the number of times to resend
mail when an error occurred within the
range of 0 – 255 using 1-byte numbers.
185
Factory default setting
OFF
MailUserAccount
<Blank>
Projector@canon.co.jp
0.0.0.0
25
<Blank>
25
10
3