Canon 4K6021Z User Manual page 186

Projector Web Screen Menu
Item
Wireless Wi-Fi
setting Protected
Setup
Mode
Select SSID
SSID
Security
Channel
Key ID
Key type
Key
• If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect
to the network. If the network subnet mask was changed, select [Subnet mask] in the
above screen and set the new subnet mask.
• IPv6 connectivity is not available in PJ AP mode (P66). [IPv6 address] is grayed out.
• For partial SSID editing when connected in PJ AP wireless LAN mode (P66), you can
edit the portion between PJ- and _Canon0D. Enter 1-byte alphanumeric characters,
including hyphens and underscores (1 – 15 characters).
Explanation
Select a method of establishing a
wireless connection. Not available in PJ
AP wireless LAN mode.
Display or select the wireless
connection mode. Not available in PJ
AP wireless LAN mode.
Select the wireless access point's SSID.
Not available in PJ AP wireless LAN
mode.
Display or select the wireless access
point's SSID. Partial SSID editing is
supported in PJ AP wireless LAN mode.
Display or select the wireless security
setting value.
Display or select the wireless channel
number. Not available when the
wireless LAN mode is infrastructure
mode.
Display or select the wireless WEP key
ID. Not available when security is set to
other than WEP.
Select the wireless security key input
type. Not available in PJ AP wireless
LAN mode.
Enter the wireless security key.
184
Factory default setting
None (Manual)
infrastructure mode
(select)
<Blank>
<Blank>
Open
6
1
ASCII
<Blank>