Canon 4K6021Z User Manual page 183

Projector Web Screen Menu
Item
IPv6
Link local
address
address
Auto
Static
IPv6
Autoconfigu-
ration
IP address
Prefix length Enter the wired LAN (IPv6) prefix length
Default
gateway
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.
Explanation
Shows the projector's wired LAN (IPv6)
link-local IP address.
Shows the projector's automatically
assigned wired LAN (IPv6) address.
Shows the projector's manually
assigned wired LAN (IPv6) address.
Specify on or off for the IPv6 function of
the wired LAN (IPv6).
Choosing [OFF] will prevent you from
configuring the following settings.
[Autoconfiguration]
[IP address]
[Prefix length]
[Default gateway]
Select on or off for the auto setting
function of the wired LAN (IPv6).
Enter the wired LAN (IPv6) address in
1-byte numbers or letters between A
and F.
in 1-byte numbers.
Enter the wired LAN (IPv6) default
gateway address in 1-byte numbers or
letters between A and F.
181
Factory default setting
The projector's wired
LAN (IPv6) link-local IP
address
Automatically assigned
IP address as acquired
for [Auto settings]
<Blank>
OFF
ON
<Blank>
<Blank>
<Blank>