Canon 4K6021Z User Manual page 34

Before Use
■ Terminals and Connectors
(2)
(1)
(1) USB port (P157)
Connects a USB flash drive. Used for firmware updates.
(2) LAN / HDBaseT port (P63, P65)
Receives HDBaseT input including digital video and audio signals.
Carries both video and audio signals across a single LAN cable (shielded
twisted pair).
This port can also be used to connect the projector to a network.
(3) HDMI terminal (HDMI-1, HDMI-2) (P62)
Receives HDMI input including digital video and audio signals.
Carries both video and audio signals across a single cable.
(4) DisplayPort port (DisplayPort-1, DisplayPort-2) (P62)
Receives DisplayPort input including digital video and audio signals.
Carries both video and audio signals across a single cable.
(5) AUDIO OUT terminal (AUDIO OUT) (P64)
Outputs the audio to external AV equipment. This outputs the audio signal that
corresponds to the projected image signal.
(6) Trigger terminal (TRIGGER) (P156)
Used to trigger operation of a screen or other external device when the
projector is turned on or off.
(7) Terminal for wired remote control (REMOTE) (P37)
This terminal is used to connect the optional remote control (RS-RC05) using a
cable.
(8) Service port (P203)
Used to control the projector with user commands
(3) (4)
32
(6) (7)
(5)
(8)
(P203 – P204).