Canon 4K6021Z User Manual page 88

Adjusting the Image
2
Use the [ ] / [ ] / [ ] / [ ] buttons to select the point for correction, and
then press the OK button.
The projector enters color selection mode.
Press the MENU button to return to [Advanced registration].
3
Select [Red] or [Blue] as the color, and then press the OK button.
• Each time you select [Chart] and press the OK button, display switches between the
chart and the source signal.
• Accessing the 5-point adjustment window during test pattern projection will show the
test pattern instead of your supplied signal.
4
Use the [ ] / [ ] / [ ] / [ ] buttons to align the adjustment points.
5
Press the OK button to return to the window for color selection mode.
6
Repeat this process to align the remaining colors and adjustment points.
86