SAFETY CHECKS BEFORE FLYING
(1) Make sure that the quad and transmitter/smart device batteries are fully charged.
(2) Make sure propellers are installed properly.
(3) Insert Micro-SD card for pictures and videos prior to powering the quad on.
(4) Check that motors arm properly after binding.
(5) Make sure the camera lens is clean.
5. APP FLIGHT
5-1 CONNECT THE QUADCOPTER WITH APP
(1) Power on the quad (hold down the power button until all four LEDs power on);
(2) With your smart device's WIFI function) find and select Hubsan_h507a_XXXXXX.
Password: 12345678.
(3) Enter the X-Hubsan APP. Select the Hubsan H507A from the drop-down menu to enter
the flight operation interface.
NOTICE: For safety purposes, please do not use your smart device for other purposes
while it is connected via the X-Hubsan APP to the copter. If you wish to control the quad
with other devices, please restart the quad.
Settings
WIFI
Wi-Fi
CHOOSE A NETWORK......
Hubsan_h507a_XXXXXX
Enter the password for"Hubsan_h507a-XXX"
Cancel
Enter Password
Password
12345678
7
Join