Installation Sequence; Sequence Overview; Installing Wall Mounting Bracket - Viessmann Vitocom 100 LAN1 Installation And Service Instructions Manual

Installation sequence

Sequence overview

Sequence
Installation
1 Check system requirements.
2 Fit wall mounting bracket.
3 Install communication module in
Vitotronic control unit.
4 Connect Vitocom 100 to the
Vitotronic control unit.
5 Connect Vitocom 100 to Vitodens
3..., type B3.
6 Connect Vitocom 100 to network
(LAN).
7 Insert Vitocom 100 in wall mounting
bracket.
8 Power supply
Commissioning
9 Switch on Vitocom 100.
10 Check LON connection to the
Vitotronic control unit.
11 Register user and set up heating
system.
■ Operation with the Vitotrol app
■ Operation with the Vitodata 100
user interface
12 Trigger heating system fault and
check reporting.

Installing wall mounting bracket

!
Please note
The installation site must be dry
and free from the risk of frost.
Safeguard ambient temperatures
between 0 and 40 °C.
Note
When selecting the installation site, bear
in mind the length of the connecting
cables (standard delivery).
12
Responsibility
Heating contractor/IT
expert
Heating contractor
Heating contractor
Heating contractor
System user
Heating contractor/IT
expert
Heating contractor
Heating contractor
Heating contractor
Heating contractor
Heating contractor/
system user
Heating contractor
Page
7
12
See communica-
tion module in-
stallation instruc-
tions
16
17
18
18
21
22
23
24
25