Viessmann Vitocom 100 LAN1 Installation And Service Instructions Manual page 9

Operation with the Vitotrol app
Functions
Vitotrol app control functions
■ Setting set temperatures.
■ Setting operating programs.
■ Scanning operating conditions and
temperatures
Note
■ The Vitotrol app only allows the user to
access one system at a time using a
single end device.
■ For further information on the Vitotrol
app, see www.viessmann.de/vitotrol-
app.
Forwarding messages
Pending messages in the heating sys-
tem, e.g. sensor or burner faults are
transferred via LON to the Vitocom 100.
The Vitocom 100 transmits these mes-
sages to the Vitodata server. The Vitotrol
app scans the status of the heating sys-
tem cyclically and displays the mes-
sages.
Preparing for installation
(cont.)
Note
Heating system messages are only dis-
played if the Vitotrol app is enabled on
the mobile end device.
Content of messages
■ Notification type
■ Message code
■ Message text
Heat source installation and serv-
ice instructions
9