Gerber Edge Owner's Manual page 9

4 GERBER EDGE Owner's Guide
UNPACKING THE GERBER EDGE
WARNING: Two people are required to lift or move the GERBER
EDGE. It weights approximately 140 pounds (63.5 kilograms)
packaged for shipment and 90 pounds (40.8 kilograms) unpacked.
The GERBER EDGE is shipped from the factory in reusable packaging
materials. Save these packaging materials for future use in case you need
to ship the GERBER EDGE. When repacking the GERBER EDGE,
install the vibration dampers and secure the hold-down brackets to the
mounting platform with bolts before putting the inner and outer sleeves
around the GERBER EDGE.
To unpack the GERBER EDGE
1. Cut the strapping which holds the cardboard package to the
shipping skid and remove the cover.
2. Lift out the accessory tray, then remove the tri-wall inner sleeve.
3. Remove the double-wall outer sleeve.
4. Open the plastic bag covering the GERBER EDGE. Fold it down
around the base so that the hold-down brackets are visible.
5. Remove the two bolts securing each hold-down bracket.
6. Lift the GERBER EDGE off the mounting platform.
7. Slide the brackets out from the bottom of the GERBER EDGE.
8. Open the top cover and remove the vibration dampers from the left
and right cam followers as shown in the following illustration.