Gerber Edge Owner's Manual page 53

48 GERBER EDGE Owner's Guide
ONLINE "IDLE" MODE
While offline, pressing the Online (ON) key puts the GERBER EDGE
in the Online "Idle" mode and the GERBER EDGE is ready to print.
Pressing the Reset (RS) key returns to the Offline mode. When the
GRAPHIX ADVANTAGE sends a job for printing, the GERBER
EDGE enters the Online "Print" mode from the Online "Idle" mode.
ONLINE "PRINT" MODE
The GERBER EDGE stays in the Online "Print" mode until one of
three things happens:
! Printing is complete and the GERBER EDGE returns to the
Online "Idle" mode.
! You press the Online (ON) key and enter the Online "Paused"
mode.
! An error occurs, an error message is displayed in the message display
area, and the GERBER EDGE enters the Online "Error" mode.
ONLINE "PAUSED" MODE
Pressing the Online (ON) key while printing puts the GERBER EDGE
in the Online "Paused" mode. The job stops printing and you can:
! look at the job while it is still in the GERBER EDGE and before
printing is complete
! rehome (RH*) the cam wheel if necessary
! slew the foil (FS*).
To restart printing at the same location where printing was interrupted,
press the Online (ON) key. To abort the job, press the Reset (RS) key
to return to the Offline mode.