Gerber Edge Owner's Manual page 12

To add a plotter to your GRAPHIX ADVANTAGE
1. Double-click on the GSP Setup icon in the GRAPHIX
ADVANTAGE program group to open GSP Setup.
2. Click on Setup in the menu bar.
3. Click on Plotter. The Add or Delete Plotter(s) dialog box appears.
4. In the Plotters list box, click on the name of the plotter or console
plotter you are installing on your system.
5. In the Ports list box, click on COM1, COM2, COM3, or COM4.
6. Click on Add. The plotter is added to the Ready for Plotting list
box.
7. Click on Continue. The plotter is added to the system and you
return to the GSP Setup menu.
Introduction 7