Gerber Edge Owner's Manual page 16

4. Double-click on the Plot icon in the GRAPHIX ADVANTAGE
program group. The Open dialog box appears.
5. Click on the C:\JOBS directory. Type EDGEOL.PLT in the File
Name list box of the Open dialog box.
6. Click on OK.
7. Press F7 for the Plotter Select dialog box.
8. If necessary, click on the 15-inch plotter you plan to use for cutting
the job to highlight and select it. Click on any other plotters to
deselect them.
9. Click on GERBER EDGE to highlight and select it.
10. Click on OK.
11. Press F10 to send the job to the GERBER EDGE.
To load the material
1. When the GERBER EDGE receives the job, it may go through a
brief warmup cycle. If so, the GERBER EDGE display reads:
WARMING UP
2. After 1 to 2 minutes, the display shows the material loading prompt:
Vinyl: WHITE
Getting Started with the GERBER EDGE 11