GE AV-300i User Manual page 51

Each segment is linearly connected by two Bands from H to M, from M to L, and by two Levels from H to M,
from M to L.
In the configurations it is possible to set for each Profile (Motoring gains & Regen gains) the gain values and the
Band and Level values common to both Profiles.
Furthermore, in order to smooth the transition between Motoring and Regen, other two parameters are used:
Sls 0 tran bnd band in the speed 0 neighborhood, connecting the profiles linearly;
the band smoothes the change between one Profile and the other
Observer filter time constant of the first-order Filter on both gains
Description:
REGULATION PARAM
Sls SpdFbk gains
Motoring gains
Sls mot HPgain
Sls mot HIgain
Sls mot MPgain
Sls mot MIgain
Sls mot LPgain
Sls mot LIgain
Regen gains
Sls regen HPgain
Sls regen HIgain
Sls regen MPgain
Sls regen MIgain
Sls regen LPgain
Sls regen LIgain
Gain transitions
Sls H/M tran lev
Sls M/L tran lev
Sls H/M tran bnd
Sls M/L tran bnd
Sls 0 tran bnd
Observer filter
Gain monitor
Inuse Sls P gain
Inuse Sls I gain
Observer ref mon
AV-300i Version 2 User's Guide
Gains for the functioning as a motor
proportional H gain
integral H gain
proportional M gain
integral M gain
proportional L gain
integral L gain
Gains for the functioning as a Regenerator
proportional H gain
integral H gain
proportional M gain
integral M gain
proportional L gain
integral L gain
Gain transition
level from H to M
level from M to L
band from H to M
band from M to L
speed 0 band
filter time constant
Displaying of the in use gains
in use proportional gains
in use integral gain
displaying............
—————— Function Description ——————
Ch.1
51