Unicast In Long Address Form Between End-Device And Coordinator - Ebyte E180-Z6907A User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd

7.3.1.2 Unicast in long address form between end-device and coordinator

(1) Before communication, enter the configuration mode first, configure the target MAC address. The coordinator
end configures the target MAC address as the long MAC address of the end-device, and the end-device end configures
the target MAC address as the long MAC address of the coordinator.
(2) After the target MAC address is configured, the transmission mode needs to be configured. Change the "network
address (short address)" to "MAC address", and then write the parameters again. At this time, the target address is
configured to unicast in the form of MAC address.
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd.
7-35
E180-Z6907A User Manual