Ebyte E180-Z6907A User Manual page 38

Chengdu Ebyte Electronic Technology Co.,Ltd
(3) Enter the transmission mode, the message box will prompt "enter the transmission mode successfully", and then
carry out multicast data communication.
(3) The end-device receiver enters the configuration mode, changes the network group number to "4", and writes
the parameter. At this time, because the network group number is not "5", the coordinator multicast data cannot be
received.
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd.
7-37
E180-Z6907A User Manual