Ebyte E180-Z6907A User Manual page 35

Chengdu Ebyte Electronic Technology Co.,Ltd
（2）After the target address between nodes is configured, click "enter transmission mode", and the message box
will prompt "enter transmission mode successfully". Before communication, confirm whether the module is in
transmission mode, and only in the transmission mode can the communication be realized. Input the data to be sent in the
sending area, click send, and the received data can be seen in the end-device node message box.
（3）Similarly, End-device unicast to Coordinator
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd.
7-34
E180-Z6907A User Manual