Overview; Brief Introduction; Features - Ebyte E180-Z6907A User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd

1. Overview

1.1 Brief introduction

E180-Z6907A is a small-sized, low power consumption, high
reliability, ZIGBEE module operating in the 2.4GHz frequency band
based on TELINK TLSR8269 wireless SOC, which is designed and
produced by Chengdu Ebyte . The chip comes with a 32-bit
high-performance MCU up to 48Mhz. The transmit power can reach up to
7dBm.
TLSR8269 is a wireless microcontroller for smart home, IoT
transformation and industrial automation. Its network characteristics belong to ZIGBEE 3.0 standard and provide a
complete application integration solution based on IEEE802.15.4 standard ISM band.
E180-Z6907A was certified by a series of authoritative RF instruments, combined with years of market experience
and the actual needs of users in this industry, it integrates the extremely complex communication protocols of wireless
products into the built-in SoC, supports serial port transparent transmission mode, It also integrates self-organizing
network function, provides multi-channel configurable ADC, IO, PWM interface.

1.2 Features

Centralized network management: ZIGBEE 3.0 security standard centralized network access mechanism, data

security and reliability;
Interoperability: Compliant with zigbee 3.0 standard network mechanism, compatible with network protocols such

as ZHA;
Large capacity: 512K flash, 32K RAM, network nodes can be extended to more than 100;

Role switch: Users can switch freely between the end-device and sleep- end-device via UART command.

Support a variety of network topology: point-to-point, star network, MESH network;

Network self-healing: when network intermediate nodes are lost, other networks automatically join or maintain the

original network;
Address search: User can find the corresponding short address according to the MAC address of the added network

node, and can also find the corresponding long address of each node in network according to the short address of the
node;
Data security: Integrated with ZigBee 3.0 security communication standard, the network contains multi-level

security keys;
UART configuration: Module built-in UART commands, users can configure (view) the parameters and functions of

module via UART command.
Change network PAN_ID: Network PAN_ID switch freely. Users can define PAN_ID to join the corresponding

network by themselves or automatically select PAN-ID to join the network.
GPIO control: Local/remote GPIO level control，there are 3 IO for users to select.

PWM control :Local/remote PWM control function，there are 4 PWM channels for users to select.

ADC control: Read local/remote ADC, there are 5 ADC channels for users to select.

Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd.
3
E180-Z6907A User Manual