Functional Parameter Description - Ebyte E180-Z6907A User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd

6.3 Functional parameter description

The module provides a wide range of configurable parameters that can be flexibly adapted to the actual application
needs to build different forms of network.
Configurati
on
Attribute
informatio
n
PANID Read/write
Local
network
address
Network
status
Target
network Read/write
address
Local MAC
address
Target
MAC Read/Write
address
Device
Read/Write
type
Channel Read/Write
Transmit
Read/Write
mode
Output
mode
Read/Write
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd.
4-13
Parameter range
0x0000～0xFFFF
Read
0x0000～0xFFFF
Read
0、2
0x0000～0xFFFF
64bitMAC
Read
64bitMAC
E、S
CH11～26
0、1、2、3、4、
5
0、1、2、3、4、
Function Description
The PANID is the network identifier of ZIGBEE and is
used to determine the identity of the network to which it
belongs. All devices in the same network must have the
same PANID. When the end-device or router is
configured as 0xFFFF, it can join any network that
already exists on the same channel；
It is used to distinguish each node in network. Each
device is in the same network. The local network
address must be unique. When the network is not added,
the network address of the device is 0xFFFF. After
joining, the short address of the device is allocated by
the coordinator. The coordinator is fixed at: 0x0000;
Indicates the network status of the current device,
including no network, successfully joining the network;
The current device communication destination (short
address) can be switched at any time through
configuration commands;
The MAC address assigned by this module network
cannot be changed by user (re-entry network to change);
In fixed-point mode, use long address to send;
They are: end-device and sleep end-device;
The physical channel through which ZIGBEE works;
The transmission modes of the configuration module
are: broadcast mode, multicast mode, short address on
demand mode, long address on demand mode, protocol
on demand, and protocol multicast. For details, please
see the corresponding mode function introduction;
Data output mode of the configuration module:配
Transparent transmission;
Data + short address;
Data + long address;
E180-Z6907A User Manual