Table of Contents
Advertisement
VAB-630 Android EVK v1.0.3 Quick Start Guide
Smart ETK UART interface
First, please open the Smart ETK sample program, then from the left side select UART.
To begin, click the CONNECT button to enable the COM port, and then a
communication between the host machine and VAB-630 will start.
When the host machine transfers data to the VAB-630, the data will be displayed inside
the red frame.
To send data from host machine to VAB-630, you need to type the data inside the white
frame and click the Enter button.
Click on the DISCONNECT button to disable this function.
13
Advertisement
Table of Contents
