Table of Contents
Advertisement
VAB-630 Android EVK v1.0.3 Quick Start Guide
3.3.
Smart ETK
The VAB-630 Android EVK includes the VIA Smart ETK program which supports
Watchdog timer, GPIO and UART functions. Please follow the procedures below to
experiment with the Smart ETK functions on the VAB-630 board.
3.3.1.
Installing Smart ETK
The first step is to copy the SmartETK_SDK_Sample.apk onto a mass storage device such
as a USB thumb drive. Next, from the Settings screen, click Security, and then enable
"Unknown sources" as shown in the diagram below.
Finally, insert the USB thumb drive into the VAB-630 and double click on the
SmartETK_SDK_Sample.apk file to install.
When the installation process has completed, run the SmartETK_SDK_Sample.apk and
start to test the different functions with it.
Smart ETK SDK sample screen
8
Advertisement
Table of Contents
