2. Image Installation
The VAB-630 only supports booting Android from the SPI ROM with eMMC. This section
explains the setup requirements for booting from the SPI ROM with eMMC.
The installation script files, the precompiled U-boot and image are provided in the
"Firmware" folder.
2.1.
Requirements
• Host machine
• Micro SD card
• EVK package : VAB-630_Android_EVK_v1.0.3.zip
2.2.
Booting from the SPI ROM with eMMC
The first step is to insert a Micro SD card into the host machine and create a FAT
formatted partition. Next, extract the VAB-630_Android_EVK_v1.0.3.zip and copy the
bspinst folder and scriptcmd file onto the Micro SD card.
Insert the prepared Micro SD card into the VAB-630, connect an HDMI display, and
power on the device to initiate the update process.
*Note:
Keep the power on during the installation process. After the installation process has
completed, the system will automatically restart.
VAB-630 Android EVK v1.0.3 Quick Start Guide
Update process screen
3