Table of Contents
Advertisement
1. Introduction
This Quick Start Guide provides an overview on how to boot the Android EVK system
image in the VAB-630 board and configure the supported hardware functions in the
build.
The VAB-630 Android EVK v1.0.3 is developed based on Android 5.0.0 (Lollipop) and it
enables the hardware features of the VAB-630 board.
1.1.
EVK Package Contents
There are three folders in the package as listed below.
Firmware folder
VAB-630_Android_EVK_v1.0.3.zip
Document folder
VAB-630_Android_EVK_v1.0.3_Quick_Start
_Guide_v1.00_20170811.pdf
Tools folder
SmartETK_SDK_Sample.apk
BluetoothSPPTest.apk
arm_201103_gcc4.5.2.tgz
1.1.1.
Firmware Folder Contents
VAB-630_Android_EVK_v1.0.3.zip: The Android EVK system image and installation
script files.
1.1.2.
Document Folder Contents
VAB-630_Android_EVK_v1.0.3_Quick_Start_Guide_v1.00_20170811.pdf: This Quick Start
Guide provides an overview on how to boot the Android EVK system image in the VAB-
630 board and configure the supported hardware functions in the build.
1.1.3.
Tools Folder Contents
SmartETK_SDK_Sample.apk: is the Smart ETK demo program.
BluetoothSPPTest.apk: is the Bluetooth SPP profile test program.
arm_201103_gcc4.5.2.tar.gz: is a toolchain, which is a set of software development tools
for building images for the VAB-630 board.
VAB-630 Android EVK v1.0.3 Quick Start Guide
Description
Android EVK system image and installation script
files
Description
Quick start guide
Description
Smart ETK demo program
Bluetooth SPP testing program
Toolchain
VAB-630 Android BSP contents
1
Advertisement
Table of Contents
