Table of Contents
Advertisement
3.2.
Configuring Display Parameters
The VAB-630 Android BSP v1.0.3 supports the following display devices:
• ONation 10.1" LVDS Panel VIA1001 OT101RBWDLT-00 (1280×800)
• HDMI monitor (default)
The following sections below describe how to switch the settings from HDMI to LVDS,
and vice versa.
3.2.1.
Setting Up the LVDS Display Parameter
To set up the LVDS monitor, first connect the ONation LVDS panel to the VAB-630
board through the LVDS1 connector
D S
L V
Use the following command to change the U-Boot parameters for the ONation LVDS
Panel
WMT # setenv wmt.display.fb0 0:[6:0:18:1280:800:60]
WMT # setenv wmt.display.ui.res 1280:800
WMT # saveenv
WMT # reset
From the output above we can see 1280:800 is the detected resolution set for the LVDS
panel.
.
l a y
i s p
l d
n e
)
i d e
P a
r s
e a
( R
2
Connecting LVDS panel
VAB-630 Android EVK v1.0.3 Quick Start Guide
1
6
Advertisement
Table of Contents
