Setting Up The Hdmi Display Parameter - VIA Technologies VAB-630 Quick Start Manual

3.2.2.

Setting Up the HDMI Display Parameter

To set up an HDMI monitor as the display output, use the following command below to
change the U-boot parameters.
The system will automatically detect the EDID information and set the HDMI monitor
default resolution. Configuring U-boot only affects the resolution for the U-boot logo.
WMT # setenv wmt.display.fb0 0:[4:6:1:1920:1080:60]
WMT # setenv wmt.display.ui.res 1920:1080
WMT # saveenv
WMT # reset
From the output above we can see 1920:1080 is the detected resolution of the HDMI
monitor.
VAB-630 Android EVK v1.0.3 Quick Start Guide
7