Setup Mode; Preset Menu; Midi / Volume - Musicom Lab EFX-LE II Owner's Manual

4. SETUP MODE

To enter the SETUP mode, press the #6(PAGE) and #8(BNAK UP) switches simultaneously on the Page 1. The LCD
display will show the following picture.
4.1 PRESETS MENU
The Presets menu consists of two sub-menus (MIDI/Volume and Routing).

4.1.1 MIDI / VOLUME

The MIDI/Volume menu allows assigning 12 MIDI messages (PC, CC and Note), Preset.BPM, two Volume values and
determining how the expression port(XPDL) will function when used function in the preset.
Editing MIDI.01 ~ MIDI.12
* The above two LCD screens show when the PC (Program Change) is selected.
EFX-LE II Audio Controller Owner's Manual
SW #5 & SW #8
SW #6
SW #7
SW #5 & SW #8
SW #6
SW #7
• Line 1 - e to g indicate the preset number that is going to be created/
modified. (001~640 or GLB)
• Line 1 - o and p indicate the MIDI message that is going to be created/
modified. (01~12)
• Line 2 - b to e indicate the type of MIDI message. (None, PC, CC, NT)
None : No MIDI
CC : MIDI Control Change
• Line 2 - h and i indicate the MIDI Program Change channel. (01~16)
• Line 2 - m to o indicate the MIDI Program Change number. (001~128)
• Line 2 - p indicates that a next page exists
• Line 2 - a indicates that a previous page exists
• Line 2 - f to h indicate the MIDI Bank Change number, MSB
• Line 2 - m to p indicate the MIDI Bank Change number, LSB
(000-127 or OFF)
Moving a Setup menu.
Entering the selected menu.
Exiting the Setup mode.
Moving a Presets menu.
Entering the selected menu.
Rerutning to the Setup menu.
PC : MIDI Program Change
NT : MIDI Note On
10