Musicom Lab EFX-LE II Owner's Manual page 11

* The above two LCD screens show when the CC (Control Change) is selected.
* The above two LCD screens show when the NT (Note On) is selected.
SW #1 & SW #2 Moving the selected blinking area.
Blinking at the Line 1 – a to g : Increasing/decreasing a preset number.
Blinking at the Line 1 – j to p : Scrolling MIDI.01~MIDI.12, XPDL, BPM and Volume.A/B.
SW #5 & SW #8
Blinking at the Line 2 – b to e : Scrolling PC, CC, NT and None.
Blinking at the other area
SW #6
Storing any changes made while in this menu.
SW #7 Rerutning to the Presets menu.
Editing XPDL
* The above LCD screen shows when the GLB (Global) is selected.
Refer to the XPDL on the page 28 of the manual.
EFX-LE II Audio Controller Owner's Manual
• Line 2 - b to e indicate the type of MIDI message. (None, PC, CC, NT)
None : No MIDI
CC : MIDI Control Change
• Line 2 - h and i indicate a MIDI Control Change channel. (01~16)
• Line 2 - m to o indicate a MIDI Contoller number. (000~127)
• Line 2 - f to h indicate the MIDI Controller value. (000-127)
• Line 2 - b to e indicate the type of MIDI message.(None, PC, CC, NT)
None : No MIDI
CC : MIDI Control Change
• Line 2 - h and i indicate the MIDI Note On channel. (01~16)
• Line 2 - m to o indicate the MIDI Note(Key) number. (000~127)
• Line 2 - f to h indicate the MIDI velocity. (000-127)
: Increasing/decreasing a value.
• Line 1 - e to g indicate the preset number that is going to be created/
modified. (001~640 or GLB)
• Line 1 - m ~ p indicate that XPDL is selected.
• Line 2 - c to e indicate whether the XPDL is configured as Preset(PST) or
Global (GLB).
PC : MIDI Program Change
NT : MIDI Note On
PC : MIDI Program Change
NT : MIDI Note On
11