Table of Contents
Advertisement
4. SETUP Mode
To enter the SETUP Mode, press and hold the MODE switch for 2 seconds. The display will show the following
picture.
• Press the ORDER (1) switch to enter the ORDER menu.
• Press the MIDI (2) switch to enter the MIDI menu.
• Press the COPY (3) switch to enter the COPY menu.
• Press the TITLES (4) switch to enter the TITLES menu.
• Press the SONG/SET (5/TAP) switch to enter the SONGSET menu.
• Press the UTILITY (BANK
▼
• Press the MUTE/
switch to exit the SETUP mode.
4.1 ORDER Menu
The ORDER menu allows changing loop structure you can make the following settings.
• Change the connection order of effect loops
• Create a parallel connection
• Specify Spill Over
The EFX-LE has two internal mixers. By using these internal mixers, you can connect loops in parallel and use the
Spill Over function.
NOTE
• The same mixers are used for parallel connections and for Spill Over functions.
• The Movable Buffer and Volume Loop CAN NOT be used for Parallel connection or Spill Over function.
•
For the mono/stereo returns of effect loops 5 and 6, Refer to the LP5/6 RETURN and LP6 SEND6.R SPLIT on
the page 29 and 30 of the manual.
• The Spill Over function allows the return signal of a currently selected preset to 'Spill' into the next selected preset.
• Line 1 – a to f indicate the bank number and preset that you want to edit.
• Line 2 - a to p indicate the loop structure of the preset.
EFX - LE Audio Controller Owner's Manual
▲
) switch to enter the UTILITY menu.
-
Loop Number
Volume Loop
Movable Buffer (BM)
A loop for which
-
Spill Over is specified
Mono connection
Stereo connection
11
Advertisement
Table of Contents
